We Are Offering Our Client A Wide Range Of Fluid Bed Dryers. Which Are Available In Various Size And Specifications. Fluid Bed Dryer Is Designed To Introduce The Hot Air Steam At The Base Of The Product Container Which Is Filled With The Material. The Fresh Air Is Heated By Means Of Electrical Heater Or Steam Radiator . This Hot Air Stream Expands The Bed Of Material At Certain Velocity & Rating Turbulence In The Product. The Product Is Dried Fast Without Appreciable Loss Of Heat. Filter Bags Prevent Particles Escaping From The Dryer. The Fluid Bed Dryer Are Most Suitable For Drying Granular, Crystalline, Coarse Or Similar Material In Pharmaceuticals, Fine Chemicals Dyes Food And Allied Products. Fluidized Bed Drying Process Is Controlled And Monitoring On Line Humidity Inlet Outlet Air. Fortune Fluid Bed Can Be Designed To Be Installed In High Containment Granulation Lines For Both R & D Labs Or Production
Salient Features:
- Mos-ss316/316L/304
- Online sampling port provided
- 65% open perforated air distribution plates with weave mesh
- Explosion Relief disc
- Uniform drying at low temperature..
- Minimum handling more hygienic
- Top Mount pneumatic cylinder (Directly coupled) Shaking (without wire rope system)
- Pneumatically operated inflatable seals provided for filter bag and product container sealing with pressure switches & FRL to ensure fail safe operation
- Fully automatic operation.
- Double wall PUF instigated AHU with PRE/MICRO V shape filters and cooling coil can be provided on demand on extra cost..
- Manually operated air dampers provided to control the inlet and outlet air flow
- Very fast processing time
- Easy to validate cleaning process
- Easy Scale up to higher capacity units
- Single scale up to higher capacity units
- Fully automatic bag shaking arrangement
- The capacity ranging from 5/10/15/30/60/120/150/200/250/300/350/500 kgs, with steam/ electrical heating facility
Control Panel / Pneumatic Panel.
- Panel board is fabricated from ss304 sheet the same can be provided electrical panel, or PLC based operation and pneumatic panel
- Temperature indicator
- Blower motor start/ stop
- Finger bag shaking timer
- Solenoid valves etc
- FRL
- Air pressure gauge
- Cooling timer etc.
Saftey Features.
- Positive ear thing device
- Solid flow monitor
- Explosion vent provided with rupture disk
- Ensure complete elimination of static charge
Optional:
- Flam proof motor
- PLC automated control system are available
- Electrically & steam operated available for heating
- Solid flow monitor valve.
- Telescopic cylinder
- Flam proof control panel
- Three piece design is also available in GMP model
- Extra container with trolley for more utilization of machine.
- A.C frequency drive for blower motor
- Differential pressure gauge or differential pressure trans meter a cross the air discharge bag. Inlet air filter and container sieve.
- Pneumatically operated butter value with actuator.
Application:
- Chemical
- Pharmaceutical
- Food Product